Zebra Liquids Description
About Zebra liquids:
Dainty Liquids are our no odor liquids with great shine.
Professional Base and Professional Shiny Top Coat are our new top of the line, low odor, super shiny liquids.
Diamond Shine Top Coat - Very thin and very shine dip top coat.
2 in 1 Professional Base & Top Coat just like our professional liquids with the base and top coat in 1 bottle. Great liquids, hard to contaminate and easy to use with great shine.
Acitvate is used to activate the reaction between the dip powder and the base coat for proper application.
Dip Matte Top Coat - you will love our matte dip top coat.
We no longer stock our original EZ & Essential Liquids.
UV Top Coat dries without a UV/gel light but will show a purplish tint under blacklight or uv Ray's.
Prep - is a ph prep to help with the ph balance on the nail bed itself. This will help products adhere better and last longer.
PH Bond - prep as usual and use this if you are having adhesion or lifting issues. Let dry thoroughly then apply gels, builder gels or dips.
Brush/Saver Cleaner is used to clean your brush if it gets contaminated. You would soak your brush in brush cleaner until the residue comes off of the brush and it is no longer stiff. You would then dry the brush out completely and replace it in the bottle of liquids. The brush in the liquids will be ready in approximately 1 hour.
Cuticle Oil, Balm or Lotion is used around the cuticle area of the nail to soften and remove dry or hardened cuticle so your hand appear beautifully hydrated.
Matte Top Coat - for a matte finish after all application of dip powder and activate is done.
Gel Base & (No Wipe) Gel Top Coats must be cured with a UV/LED light to work properly. Many people do the dip process with gel liquids or top the dip liquids with a no wipe gel top coat. Cure for 60 seconds with UV lamp or 30 seconds under a LED lamp. Strong matte top coat.
Matte Gel Top Coat - apply over your gel or dip manicures. Must be UV/LED cured. Cure for 60 seconds with UV lamp or 30 seconds under a LED lamp. Strong matte top coat.
Builder Gel in a Bottle - Must be cured. Easy to use in a bottle with a brush. Best used with forms. Depending on your UV/LED lamp cures in around 60 seconds. Test a small amount first. For best results clean around the nails prior to curing.
Builder Gel in a jar - Must be cured. Apply with gel brushes. Best used with forms. Depending on your UV/LED lamp cures in around 60 seconds. Test a small amount first. For best results clean around the nails prior to curing.
Gels - Fun to use and easy to apply. Cure around 60 seconds under UV/LED depending on your lamp.
Standard Monomer - Excellent for competition and 3d nail art. Use with our Dual, Co-Polymer or Sculpting acrylic powders.
Pro Monomer -Setting for professional/seasoned nail technicians. Use with our Dual, Co-Polymer or Sculpting acrylic powders.
Elite Monomer - Fast setting time for advanced nail technicians. Also great for colder climates.Use with our Dual, Co-Polymer or Sculpting acrylic powders.
Spider Gels - Fun for decorating your nails, over dip or gel. Must be cured under UV/LED.
Transfer Gel - for use with transfer foils. Make your nails pop with fun designs or accents. Apply and flash cure for 10 seconds, press on the transfer foil, peel off the plastic piece and apply top coat and cure.
Thinner - if you contaminate your base or top coat (fairly hard to do with our liquids) put a few drops in and it will restore your liquids.
Peel Base - use for short mani changes. Place on nail before dip process. Will only last 2-5 days typically.
Professional Peel Base - this is a fabulous peel base that goes on clear and lasts up to 2 weeks.
Liquid Latex - to use around nail bed for cleaner application.
Clear Nail Polish Top Coat - simple no cure top coat.
Cuticle Remover - use to soften cuticles for easy removal.
Acetone - for removal of dip and gel manicures.
Hand Sanitizer - use to remove germs.
Defuser Refills - for room diffusers. NOT FOR USE ON SKIN
INSTRUCTION VIDEOS COMING!!